Side-Power RC-10E Bedienungsanleitung PDF herunterladen (Seite 10)

Installation & User Manual, Radio Remote RC10E Page 10

Howtouseabowthruster

1. Turn the main power switch for the bow thruster on. Turn on the power to the receiver.

2. Turn on the transmitter by pushing the transmitter’s two “ON” buttons. The remote system is

now activated and then turns off automatically appr. 4 min. after the last usage (see page 9).

3. Please take some time to exercise thruster usage in open water to avoid damages to your boat.

4. Turn the bow in the desired directiony by pushing the red button for port movement or the

green button for starboard movement.

Howtouseabow&sternthrustercombined

The combination of a bow and stern thruster offers total manouverability to the boat and the

opportunity to move the bow and the stern separately of each other. The remote middle buttons

gives you the opportunity to operate both thrusters in the same direction with one keypress,

making sidewards movement easier.

Remote Control Deactivation

Push the transmitter’s “OFF” button for 2 seconds (the remote control deactivates automati-

cally after approx. 4 minutes after the last usage). Turn off the power switch for the receiver.

• Ifindoubt,tryinopenwaterrst!

Remote control “ON” TurnboattoPort

Bow+Sternthruster

Remote control “OFF”

TurnboattoStarboard

Auto-OFF

appr.4min.

Hold for

2 seconds

1 2 ... 5 6 7 8 9 10 11 12

Keine Kommentare

Side-Power RC-10E Bedienungsanleitung Seite 10